[Poppy_EONNext]

Hey Community 👋

Welcome to part 2 on how to read your Export meter 🙂

You can find part 1 here: Export Reading Guide - Manufacturer: Elster

Now we move on to the more common meters we see:
Landis & Gyr
Aclara

Landis & Gyr

There are 3 types of Landis and Gyr meters so you may need to try all 3 to find the Export reading.

Method 1 👇
There is a second menu on the meter that is accessed by -

1. Holding button "A" for 3 seconds.
2. Once the display changes then repeatedly press "A" until you see ‘Total Act Export’ in KWH

Method 2 👇

1. Press button "A" twice.
2. Hold button "A" for 4 seconds.
3. Press button "A" to scroll through the screen until the below is showing "Total Act Export" in KWH

Method 3 👇

1. Press and hold the "A" button until the time is displayed.
2. Cycle through the display by pressing the "A" button until the display shows "total act export" in KWH

Aclara

1. Press the B button to wake up the screen.
2. When the screen lights up, press the B button a few times until you see a message starting with either ‘Total’ or ‘TOU’.
3. Press the A button a few times until you see ‘Total Active Export’ - this screen will show your export reading in kWh.

Check back tomorrow for the final 4 guides 😎

• Kaifa
• Itron
• EDMI
• Honeywell

If you have any questions, please reach out!

[Anasa_EONNext]

@Poppy_EONNext Some great information here! Don't forget we also have Part one with the Elster and will continue to keep you updated 😅