AltHAN is already being rolled out by several energy companies, including E.On Next (allegedly), but only in certain areas and only as a 'beta'. It's not so much a function of the energy suppliers who have very little say in the matter, but the metering teams who have access to the limited supplies of the appropriate hardware. AltHan will likely be targeted at 'difficult' new installations before it becomes available as a retrofit option.
Energy companies are 'responsible' for the metering equipment, but the comms hubs and associated equipment are owned by and supplied through the DCC, so they actually have the final say, not the suppliers. And we all know that they have no end-user interface!
Last edited by retrotecchie; 22-05-24 at 00:41.
Don't shoot me, I'm only the piano player. I DON'T work for or on behalf of EON.Next, but am willing to try and help if I can. Not on mains gas, mobile network or mains drainage. House heated almost entirely by baby dragons.
It appears some (possibly all?) of the plug-in component of the current Alt HAN solution are being recalled due to a safety issue.
We've had an email from E.ON Next telling us to unplug it and they'll come and pick it up from us in the next few weeks, and that we're looking at a 6 to 8 week wait for a visit to supply and pair a new one.
I can't say for sure of course, but I would imagine new installs will be on hold until affected units have been replaced.
For reference if it helps, ours was installed in January '24 as part of a new smart meter install at a property previously flagged as requiring Alt HAN when an earlier install did not go ahead due to HAN range issues. We're in the Eastern region.
Thanks for the update, I've been waiting for years to get this sorted. I wish I had never ever agreed to EON Next when they took over the Sainsburys Energy accounts to bully me into getting a smart meter.
The Ombudsman has ruled that EON Next need to replace the meters so hopefully I can get my account tagged as needing alt HAN
The safety issue with the AltHan devices is to do with a 'what if' scenario rather than the devices themselves being faulty, per se.
The device plugs into a standard 13A socket but actually consumes very little power. The problem is, there is a 'pass through' socket on the device provided so that you don't lose the use of a socket when you have the device plugged in. If you don't use the pass through socket then there is no problem. However, if you do, the wires between the plug and the socket aren't rated for any more than 3A and there is no internal fusing. If you plugged in, say, a space heater or a tumble drier that draws more than 3A, then the wires overheat, burn out and the device can catch fire. It would have been a simple matter to design the device with no pass through socket, or to use thick copper or brass interconnecting strips but that didn't happen. If you don't use the socket, they are perfectly safe, but if there is a mains socket on any device then it MUST be capable of supplying a full 13A safely, or have a user-replaceable fuse to limit maximum capacity. These puppies don't so that is why they have been recalled.
As with every diverse community, there is always a mixture of opinions, knowledge as well as understanding - that’s what makes it such a great place to be! To make sure everyone gets the most out of our Community and feels good doing it, we’ve created some values below on how to be an awesome, positive member. So, take a read and then go for it!
We love having you all here in the Community and really hope you find some great advice and help from our other amazing members. As a community team, our main role here is keeping things ticking over, everyone safe and getting involved in some great conversations! We know many of you will have specific queries about your accounts and we want to keep your personal details safe so please don't post them here.
• Saying thanks goes a long way
• The community is a public website, so be careful
• Be kind, respectful and supportive
• It's a family-friendly community
• If you’re in a specific section or discussion, try to stay on topic
​​​​​​​• One post is normally enough
• Be cool, don’t spam
We want to ensure that the community is safe and fair for everyone…
We all work hard to ensure everyone feels respected and supported while using the community, and keep that positive energy flowing. If a member or group is disrupting your experience without a genuine reason, you can report this to the community team quickly and easily by clicking the 3 dots on the post. Don’t worry about a thing, we’ll take it from there. If you get a message from the team about your behaviour, please try to work with us, as all we want to do is make this a positive place for everyone. In order to this, we have to uphold these Community Values and the Community Team has the final say.
The full Community Values can be viewed here
If you agree, please click the 'I agree' checkbox and press the 'Complete Registration' button below. If you would like to cancel the registration, click here to return to the Community homepage.
Although the administrators and moderators of E.ON Next Community will attempt to keep all objectionable messages off this site, it is impossible for us to review all messages. All messages express the views of the author, and neither the owners of E.ON Next Community, nor vBulletin Solutions Inc. (developers of vBulletin) will be held responsible for the content of any message.
By agreeing to these rules, you warrant that you will not post any messages that are obscene, vulgar,sexually-oriented, hateful, threatening, or otherwise violative of any laws.
The owners of E.ON Next Community reserve the right to remove, edit, move or close any content item for any reason.
