[helpmaboab]

@WizzyWigg, @meldrewreborn,

I have an update!

In summary: it looks like we are fixed, but have a new issue

Our MDS on-site visit happened this week. We were pleased that unlike last year's experience, the engineer listened to our explanation and theory of the problem.

He replaced the gas meter, remarking that it was not of a type he'd seen before. He then replaced the electricity meter and comms hub. This meter did not work, so he replaced it with another. The new comms hub is dual-band, though he was concerned that the configuration of our house meant that it was just on the edge of dual-band capabilities. He said that Alt-HAN was not an option in Scotland since its trial use was only taking place in the south.

According to the IHD, all communications have been established, and readings are now visible on the display.

Now the new issue: i thought I'd see what the Bright app showed and was pleased to see that it now had readings for electricity and gas. However... the hourly gas usage on the afternoon that the meter work took place is given as:

0.0, 0.0, 1.63, 0.68, 7,427.67, 0.2, 4.16 KWH.

I'm now looking for advice as to how to address the crazy reading before we get a bill for it! WIll the customer support folks be able to access this info? @Han_EONNext

Thanks all for your help throughout.

[WizzyWigg]

Afternoon @helpmaboab
So glad to hear the good news in getting the meters to harmoniously communicate.
As for the latest issue I use that amount of gas in 9/10 months not an hour 😳. You say those figures were taken on the afternoon of installation, does it still show at this moment in time? Just wondering if it's a blip. If it was me I would have a word with CS if it still shows.
What does the IHD show for that day? I appreciate it won't probably give you an hourly reading. Also if you have the initial meter reading after the installation and compare it with the reading now, that might be worth doing to see if you get a high reading. You will have to convert the difference into KWh. The equation can be found on a statement.

[retrotecchie]

@helpmaboab

Did they take a final reading off your old meter?

[meldrewreborn]

@helpmaboab

Look at the readings on the actual meter, and compare to the starting figure. Clearly something is not right. To convert cubic meters consumed to an reasonably accurate although approximate kWh figure, multiply by 11.17.

[Mailman]

Originally Posted by helpmaboab

Now the new issue: i thought I'd see what the Bright app showed and was pleased to see that it now had readings for electricity and gas. However... the hourly gas usage on the afternoon that the meter work took place is given as:

0.0, 0.0, 1.63, 0.68, 7,427.67, 0.2, 4.16 KWH.

I'm now looking for advice as to how to address the crazy reading before we get a bill for it! WIll the customer support folks be able to access this info? @Han_EONNext

Thanks all for your help throughout.

Re this crazy meter read (or rather crazy gas kWh usage), when I moved to my present address nearly 3 years ago I moved into my current 'smart metered' property and have used Bright intermittently since then. I knew that the previous owner had smart meters installed earlier in the year but had left the property largely unoccupied. I first saw actual gas usage on 4th August (0.25kWh) possibly testing the boiler when we had a pre-purchase visit. All the readings from Bright on all tabs showed and still continues to show just this initial gas usage until the day we moved in (27th August). Then from 0800-0830 on the 30th August, after using minimal gas that weekend Bright tells me that I used 7520.35 kWh of gas. Clearly impossible and never backed up by a meter read spinning wildly out of control. I was not billed for such an amount precisely because my meter was behaving itself all the time.

My advice would be to look at your meter reads as recorded within your online account. If your actual gas meter shows readings in line with what your last read in your online account is displaying then no need to worry and check that the Meter Serial Number in your account matches reality as well. You can always trigger a manual statement by submitting an accurate meter read online. 👍

[helpmaboab]

@Mailman Thanks. It was clearly a blip that was not reflected in my Eon meter readings inline. I've now had a statement which confirms that. Thanks to you, @WizzyWigg, @retrotecchie, @meldrewreborn for providing help and encouragement to get this long running issue fixed.

I wonder how many other customers in the same situation have been fobbed off with the excuse of 'its and industry wide blank meter read problem' when it's just that the comms provided for the smart meters are not adequate for the particular house.

[WizzyWigg]

@helpmaboab
So glad all sorted 👍.

[SmartMeterQueries]

Sending solidarity! I have repeated issues, but my wifi is fine in my garage

Eon used this faulty meter as an excuse to send me a huge recent gas bill, so check your account regularly and don't back down if the figure looks wrong!!

[Mailman]

Originally Posted by SmartMeterQueries

I have repeated issues

As we can all see by the raft of recent posts in different threads over a relatively short time period. Plenty of emotion but sparse on precise detail.

However I (and others who have replied) really don't know for sure exactly what your issues are. 🤔

[SmartMeterQueries]

I'm seeking other people who've had smart meter issues, to prove it's not just me and smart meters can be wrong and readings can glitch.