Can't see anything on line. It's a new install. The unit has two white buttons side by side unlike the online examples which has one green and elsewhere another button which is unlike my arrangement
Toshiba SKU2 Meter Reading
-
How do I get the meter readings?
Can't see anything on line. It's a new install. The unit has two white buttons side by side unlike the online examples which has one green and elsewhere another button which is unlike my arrangement -
6 Replies
-
@Johnrv8
The Toshiba SKU2 is the communications hub, not the actual meter. If you can post a photo, we can advise further.Don't shoot me, I'm only the piano player. I DON'T work for or on behalf of EON.Next, but am willing to try and help if I can. Not on mains gas, mobile network or mains drainage. House heated almost entirely by baby dragons. -
Yes, see it
Kaifa M120 meter.
How to read your Kaifa MA120 SMETS2 Electric Meter:
This meter does not require 'waking up' and uses a default auto scroll mode, cycling through its four screens. It will cycle through to the screen with your meter reading on automatically.
To take two rate meter readings from your Kaifa SMETS2 electricity meter:
- Press the top button (K1) to enter the menu system.
- With the arrow next to General Display, press and hold the top button (K1).
- Then press the bottom button (K2) to scroll down to Tariff Matrix. With the arrow next to Tariff Matrix, press and hold the top button (K1).
- With the arrow next to TOU Register, press and hold the top button (K1). T01 shows the total for R1, T02 shows the total for R2. T03 and 4 shows the unused Rate band.
To take an export reading from your Kaifa SMETS2 electricity meter:
- Your meter will automatically switch between 4 different screens - you don’t need to push any buttons.
- Your export reading is on the screen that shows ‘-A value’ in kWh.
-
My meter has arrow up and arrow down buttons.
using your instructions K1 = Arrow up. K2= Arrow down.
It works.
many thanks for a quick response.
Regards John