[omeg]

Hi,

Are there any instructions on how to read my dual rate meter please? I looked online and it mentions pressing a blue button but there’s no blue button…

Thanks

P.S.: I have tried to attach a photo but it seems I don’t have sufficient privileges…
Top left of meter: WNC UBB-TN6
Left, bottom part: EDMI ES-12B

[meldrewreborn]

From the eon next website:


The screen on your meter switches between 3 displays. To see your meter reading, please use the 'IMPRT' screen.
If the screen moves to quick for you to take note of the value, you can follow the steps below:

1. Hold OK until it enters the ‘Main Menu’, you will see ‘Billing’ appear
2. Using the arrows, scroll to ‘Info’ (2 pushes of the > button)
3. Hold OK until it enters the ‘Info’ sub-menu, you will see ‘Join’ appear
4. Using the arrows, scroll to ‘WattH’ (10 pushes of the > button)
5. Hold OK until it enters the ‘WattH’ sub-menu
6. It will now display IMPRT with a value underneath. Please use this when submitting your meter reading.

After a minute of inactivity the meter will revert back to it's default display.
If you're a 2 rate customer, follow these steps;

1. Hold OK until it enters the ‘Main Menu’, you will see ‘Billing’ appear
2. Hold OK to enter the ‘Billing’ sub-menu
3. Using the arrows, scroll to ‘Advancd’ (2 pushes of the > button)
4. Hold OK to enter the ‘Advanced’ sub-menu, you will see ‘TOUmtrx’ appear
5. Hold OK to enter the ‘TOUmatrx’ sub-menu, you will see ‘RATE1’ appear
6. Use the arrows to cycle the rates you need to submit (Rate 1, Rate 2, …)

[omeg]

Thank you, will try that. Not exactly straight forward! 😀

[meldrewreborn]

@omeg
Much simpler with a traditional meter. I will not voluntarily accept a smart meter until there are guarantees of service attached and compensation if those are not delivered.